Settling Bucket Construction Kit
If you’re looking to set up a settling bucket for your water plan, this kit provides everything but the bucket and bucket strainer to get you started.
If you’re looking to set up a settling bucket for your water plan, this kit provides everything but the bucket and bucket strainer to get you started.
If you’re looking to set up a settling bucket for your water plan, this kit provides everything but the bucket and bucket strainer to get you started.
Do you have a settling bucket? A settling bucket is a holding container that allows sediment to naturally fall out of solution over time in order to reduce the amount of sediment your filter needs to remove from the water. Not only can it drastically prolong the life of your filter but also require far fewer disinfection resources. Make construction of your settling bucket simple and straightforward with our new settling bucket decal and kit. Please note that to reduce the cost of the three and five packs, they will NOT include multiple paddle bits. If you’d like multiple paddle bits, please purchase additional paddle bits OR multiple individual kits instead of the three or five packs.
Specifications - Specific treatment data and instructions in the pictures across the website has been omitted. All WDC products will arrive with these spaces filled with the actual data.
INCLUDES:
3/4” Wide, 1/4” drive, 6” long tool steel paddle (spade) bit
3/4” Spigot
Instructions and alignment decal
7.5” x 9” - Please note this decal has specific alignment instructions for where and how to place it on a standard 5 US GAL bucket.
The included spade (paddle) bit, when correctly used will neatly slice the decal out of the way for the placement of the spigot.
Please be sure to install a seal on both the INNER and OUTER surfaces and finger tighten the nut until there is no leaking. DO NOT OVER TIGHTEN.
High-Quality, matte finish
Die cut
UV resistant
Waterproof
Scratch Resistant
Heat resistant
High-tac adhesive
Legible under NVGs
Designed, printed, and packaged here in the USA
DISCLAIMER/WARNING - DO NOT DRINK WATER FROM A SETTLING BUCKET. THE SETTLING PROCESS DOES NOT QUALIFY AS AN ADEQUATE METHOD OF WATER TREATMENT AND/OR DISINFECTION. THE BLEACH AND IODINE DOSAGES PROVIDED ON THE WATER DATA CARD FAMILY OF PRODUCTS ARE IN ACCORDANCE AND ALIGNMENT WITH THE DOSAGES AS RECOMMENDED BY THE CDC AND EPA FOR SAFE WATER PREPARTION. PLEASE NOTE THAT THESE CONCENTRATIONS AND DOSES ARE CONSIDERABLY HIGHER THAN OTHER MANUFACTURED OPTIONS (AQUATABS, AQUAMIRA, H2GO) AND SHOULD BE TREATED ACCORDINGLY. CANA PROVISONS DOES NOT RECOMMEND THE USE OF HOUSEHOLD BLEACH AS YOUR PRIMARY WATER TREATMENT METHOD DUE TO THE VARYING CONCENTRATIONS OF BLEACH AND ITS DEGREDATION/DECOMPOSITION OVER TIME. FOLLOW ALL MANUFACTURER’S DIRECTIONS AND PERSONAL PROTECTIVE EQUIPMENT (PPE) FOR THE SAFE HANDLING OF BLEACH. DO NOT DRINK BLEACH. YOUR WATER TREATMENT IS YOUR RESPONSIBILITY.
