LAUNCH SALE LIVE - SAVE UP TO 30%

English Chevron
United States USD Chevron
LAUNCH SALE SHOP FREE WATER PLAN WATER QUALITY RESOURCES CONTACT
Account
Home / Products / AR-1 DIY Hose Hardware Set
Collection of hose connectors and parts on a white background
Collection of hose connectors and parts on a white background

AR-1 DIY Hose Hardware Set

$20.00
Collection of hose connectors and parts on a white background
AR-1 DIY Hose Hardware Set
$20.00

Add-Ons & Accessories

Cana ar1 water pump with visible branding on a white background
AR-1 Starter Kit
$700.00
$850.00
brown hose with black fittings on a white background
Custom Length Intake Hose for AR-1
From $30.00
green garden hose with black fittings on a white background
Custom Length Output Hose for AR-1
From $24.00
green flexzilla water hose for cana provisions ar-1 water transfer pump system with fittings on a white background
Long Hose Set for AR-1
$88.00
Two brass hose fitting connectors with black plastic parts on a white background
Male QD to 3/4" Garden Hose Thread Adapter Set
From $7.00
green flexzilla water hose for cana provisions ar-1 water transfer pump system with fittings on a white background
Short Hose Set (for AR-1)
From $68.00
PRODUCT INFORMATION

Want to use your own hoses for your Cana Provisions AR-1? No problem. Included in this kit are the adapters that you’ll need in order to turn any standard garden hose into a usable hose with your AR-1 pump.

Includes:

  • (1) 5/8" GH Back-to-back joiner
  • (2) Male QD adapters
  • (3) 5/8" Hose clamps
  • (1) 5/8" Female garden hose thread adapter (GHT)
  • (1) Pre-strainer with spacing bushing
ATTENTION APO/FPO CUSTOMERS

Please note that USPS has changed their shipping restrictions and will not ship Li-Ion batteries to APO/FPO addresses. As a result, we must separate the included battery from the AR-1 Starter Kit. For further information, please contact us via email.

WARNING/DISCLAIMER Plus

APO/FPO Customers: Please note that USPS has changed their shipping restrictions and will not ship Li-Ion batteries to APO/FPO addresses. As a result, we must separate the included battery from the AR-1 Starter Kit. For further information, please contact us via email.

  • The AR-1 is not intended to be treated as a filter. Do not drink water directly from the AR-1.
  • Before first use, flush with 10-15gal of water or until water runs clear.
  • Do not pump flammable substances or caustic chemicals
  • Do not use pump in a flammable environment with a vapor ignition hazard
  • Do not submerge AR-1
  • Avoid drops of more than 4' onto hard surfaces
  • Do not exceed 15V of input voltage
  • Please use AR-1 responsibly

MORE AR-1 PRODUCTS

green flexzilla water hose for cana provisions ar-1 water transfer pump system with fittings on a white background
Short Hose Set (for AR-1)
From $68.00
green flexzilla water hose for cana provisions ar-1 water transfer pump system with fittings on a white background
Long Hose Set for AR-1
$88.00
brown hose with black fittings on a white background
Custom Length Intake Hose for AR-1
From $30.00
green garden hose with black fittings on a white background
Custom Length Output Hose for AR-1
From $24.00
Two brass hose fitting connectors with black plastic parts on a white background
Male QD to 3/4" Garden Hose Thread Adapter Set
From $7.00
Collection of hose connectors and parts on a white background
AR-1 DIY Hose Hardware Set
$20.00
sticker representing a cana provisions water pump on a white background
AR-1 Sticker
$2.00

FREQUENTLY ASKED QUESTIONS – AR-1

Answers to most common questions about the Cana Provisions AR-1
How do I operate the AR-1? Plus

The AR-1 was designed to be both intuitive and easy to operate. For step by step operations, please see our instruction card included in your order, or reference the digital version here.
How long will the AR-1 run? Plus

The length of time that your AR-1 will run continuously will depend on your power source and whether you are running it for straight throughput OR to generate pressure. While using it to build pressure, it will consume roughly double it’s consumption rate and subsequently roughly halve your run time on your particular battery.
Do you offer custom length hoses, repair kits or hardware to make my own hoses? Plus

Absolutely, yes. Please see our accessories section by clicking here.
How many gallons is my AR-1 good for? Plus

We have test units that have pumped more than 10,000gal in a single, uninterrupted setting. (85deg F at 45% humidity, out of direct sunlight, with continuous power)
Can I store my AR-1 wet? Plus

For short term movement, storage, employment, absolutely, yes. That being said, while not in use or planning on use, we recommend allowing the pump to run “dry” by disconnecting both hoses for 5-10 seconds and turning the unit on. This will purge the remainder of the water from inside the unit. We also recommend allowing your hoses to hang and drip dry. While you can store the AR-1 and accessories wet, for longevity, we recommend allowing them to dry before longer term storage.

Can I pump liquids other than water with my AR-1? Plus

The AR-1 was designed to circulate water with the ultimate goal of using that water for consumption. While the AR-1 IS NOT A FILTER and you should not consume water directly through from the AR-1, avoid pumping other fluids that could contaminate your water further. DO NOT PUMP caustic chemicals or flammable liquids or fuels. This includes but is not limited to: pool chemicals, oxidizers, diesel, kerosene, AvFuel (all formulations), gasoline, butane, NG, LP, etc. Doing so can be extremely hazardous to your health and safety and will void AR-1 warranty. Please use your AR-1 responsibly.

How far will the AR-1 pull water up? Plus

The AR-1 will pull water up to itself (aka - lift) water on the intake side up to an elevation of 10’ unassisted, started dry with no prime. This may vary slightly depending on your elevation and barometric pressure. If it is not doing so, make sure that the intake strainer is fully submerged and the intake hose hasn’t collapsed on itself. This is indicating that the intake hose is clogged.

How far up will the AR-1 push water? Plus

The AR-1 will push water up to an astonishing 100’+ in vertical elevation. The exact distance may vary based on your elevation and barometric pressure. To achieve a faster arrival of water at your elevation, plug in your outlet hose and turn the pump on until water is coming out the outlet hose. Turn the pump off, then elevate the hose. Once your outlet hose is at elevation, turn the AR-1 back on. Water should begin to flow immediately.

How far can I pump water with the AR-1? Plus

At this time, we have tested lengths in excess of 140’. As long as you haven’t exceeded 100’ in vertical elevation change, depending on your elevation and barometric pressure, you should be able to push water in excess of 200’ along uneven terrain.

YOU MIGHT ALSO LIKE

AR-1 & ACCESSORIES

AR-1 & ACCESSORIES

10 products
DECON KITS

DECON KITS

11 products
FIELD KITS & MEDICAL

FIELD KITS & MEDICAL

15 products
Hydration system components including a bladder, and pouch on a concrete surface.

FILTRATION

47 products