Image 1 of 25
Image 2 of 25
Image 3 of 25
Image 4 of 25
Image 5 of 25
Image 6 of 25
Image 7 of 25
Image 8 of 25
Image 9 of 25
Image 10 of 25
Image 11 of 25
Image 12 of 25
Image 13 of 25
Image 14 of 25
Image 15 of 25
Image 16 of 25
Image 17 of 25
Image 18 of 25
Image 19 of 25
Image 20 of 25
Image 21 of 25
Image 22 of 25
Image 23 of 25
Image 24 of 25
Image 25 of 25
AR-1 Starter Kit
CANA AR-1
The AR-1 was designed as the first and most crucial component of the modular CANA ECOSYSTEM. While designed to pressurize and drive the ecosystem, the AR-1 was designed to first and foremost STAND ALONE. Whether you’re moving on foot, on two wheels, four wheels, setting up camp or in your backyard the AR-1 is expressly designed to meet your water transfer needs. From source to container, container to container, pressurizing a pre-plumbed system or feeding a filter - MOVING WATER is what the AR-1 does. No more hand pumping, no more siphoning, no more dunking containers in the pond. Its application is limited only by your imagination.
Features:
IP65 Enclosure
Recessed Switch
Power Present LED Indicator
Anderson 15-45A Connectors
User serviceable 10A SAE Fuse
Machined HDPE Chassis
Crash hardened
Vibration dampened
Near Silent Operation
Provided on-board power and accessory storage
What's included:
AR-1 Pump
12V Accessory power cord with male connector
10’ Intake hose with attached pre-strainer and QD connector
5’ Output hose with QD connector
Two in-line strainers
User selectable and serviceable
50mesh Intake Arm Strainer
35 mesh Intake Hose Strainer
QD Hose attachments
Mesh carrying bag
Tethered QD inlet/outlet plugs
Battery Accessory Sleeve (elastic battery retention sleeve) installed on crash bar
Cana Anderson to DC barrel connector (2.1x5.5mm)
TalentCell battery and charging cable
NEW: Includes one set of LumiMod Glow washers - your choice of green or blue
Technical Specifications:
Overall Dimensions: 9”(L)x8.37”(W)x5.5”(H)
Total system weight: 9lbs 3oz
Pump Alone: 6lbs 8.5oz
Intake and outlet hoses alone: 2lbs 2.5oz
Pumps 3.0-3.7 gallons per minute (11.3LPM)
Adjustable Pressure up to 55psi
Pulls 3.5A at 12V during operation
7.5A max, fuse protected
Intake and Outlet hoses are 5/8” ID
CANA Provided in-line strainer: 50 mesh
CANA Provided pre-strainer: 35 mesh
APO/FPO Customers: Please note that USPS has changed their shipping restrictions and WILL NOT ship Li-Ion batteries to APO/FPO addresses. As a result, we must separate the included battery from the AR-1 starter kit. For further information, please contact us at: info@cana-provisions.com
Warnings
The AR-1 is not intended to be treated as a filter. Do not drink water directly from the AR-1.
Before first use flush with 10-15gal of water or until water runs clear.
Do not pump flammable substances or caustic chemicals
Do not use pump in a flammable enviornment with a vapor ignition hazard
Do not submerge AR-1
Avoid drops of more than 4’ onto hard surfaces
Do not exceed 15V of input voltage
Please use AR-1 responsibly
